Garmin MX20 Pilot'S Manual Download Page 91

Page: 91 / 152

Detailed Operation

Cyclone

This product is not available at this time.

Label

Press

MENU/ENtER

key and then press the

LABEL

Menu Item key to toggle the station labels on and off.

Flight Plan

Press

MENU/ENtER

key and then press the

FLIGHt PLAN

Menu Item key to toggle the Flight Plan course

line on and off. The magenta line is the active leg.

Legend

Press

MENU/ENtER

key and then press the

LEGEND

Menu Item key to display the legends describing the

graphic display colors. Press the

arrow keys to display the legends for the selected services. Press

Done

to turn the Legends off. A graphic of each product legend is shown on page 75.

Map Detail

Press

MENU/ENtER

key and then press the Map Detail Menu Item key to choose between the display of No

Overlays, the Base Map, or Map and Nav Aids.

Map Orientation

Press

MENU/ENtER

key and then press the Map Orientation Menu Item key to choose the configuration of

the map orientation of

DtK Up

North Up

tRK Up

tRK Up Arc

, or

tRK Up 360

XM FIS Forecast Menu Item Page 3

GDL 69/69A - FIS

Summary of Contents for MX20

























































































































































Search results

Summary of Contents for MX20

Reviews:

Brands by name

Popular brands

Garmin MX20, Pilot'S Manual

Search results

Summary of Contents for MX20

Reviews:

Brands by name

Popular brands