manualshive.com logo in svg

Garmin MX20, Pilot'S Manual

Share
Download
Garmin MX20 Pilot'S Manual Download Page 90

Detailed Operation

AIRMET

AIRMETs (AIRman’s METeorological Information) advises the pilot of weather that may be hazardous to single 
engine, other light aircraft, and Visual Flight Rule (VFR) pilots. This advisory affects an area of a least 3,000 
square miles at any one time and provides data about ceiling, obscuration, and turbulence issued by the 
National Weather Service (NWS). The update rate is every 12 minutes. 
When enabled, the following AIRMETs are available for display: 

• 

Icing

• 

Turbulence

• 

IFR conditions

• 

Mountain obscuration

• 

Surface winds

Refer to the Legend for a description of the color coding. 

. Press the 

Å

 or 

Æ

 arrow keys to dsplay the legends for the selected servces. 

. Press 

Done

 to turn the Legends off. 

Freezing Levels

This product is not available at this time. 

County

The County selection provides specific public awareness and protection weather warnings for Hurricanes, Tor-
nados, Severe Thunderstorms, Floods, Flash Floods, and special Maritime conditions provided by the National 
Weather Service (NWS). 
Refer to the Legend for a description of the color coding. 

. Press the 

Å

 or 

Æ

 arrow keys to dsplay the legends for the selected servces. 

. Press 

Done

 to turn the Legends off. 

XM FIS County Warnings Legend

XM FIS AIRMET and SIGMET Legend

GDL 69/69A - FIS

Summary of Contents for MX20

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands