manualshive.com logo in svg

Garmin MX20, Pilot'S Manual

Share
Download
Garmin MX20 Pilot'S Manual Download Page 93

Detailed Operation

Sorting TAFs and METARs

Displayed text products can be sorted by distance from your present position (Nearest Pos), distance from 
destination (Nearest Dest), or alphabetically (Alpha). 

. Press 

Menu/Enter

. 

. Press the top menu tem to toggle between the choces. 

Temporary Flight Restrictions (TFRs)

The full page view of the TFR is available when TFR Text is selected. TFR information includes: type, 
minimum and maximum altitude, and Notam ID. If TFR text extends beyond the page size, no scrolling is 
available. 

. Press the 

FN

 key and then the 

FIS

 functon key when dsplayed. 

. Press the fourth functon smart key on the rght to select the Text (

Text

) sub-functon. 

. The 

Menu/Enter

 key brngs up the menu tems. Press Vew, f necessary, to dsplay the FIS Category 

wndow. 

. Press the 

Ç

 or 

È

 functon smart keys to move up or down the FIS category lst to hghlght TFR. 

. Press the 

Æ

 arrow key to move the tems n the lst for the TFR category. 

. Whle n the lst for the TFR category, press the 

Ç

 or 

È

 functon smart keys to hghlght a partcular 

message for the selected category. The text for the selected message s shown n the FIS Message 

wndow n the upper porton of the screen. 

Status

The Status sub-function displays information about the available XM products, receiver performance, and 
subscription level. 

. Press the 

FN

 key and then press the 

FIS

 functon key when dsplayed. 

. Press the fourth functon smart key on the rght to select the Status (

Status

) sub-functon. 

. The 

Menu/Enter

 key brngs up the menu tem. 

. Press the top menu tem smart key on the rght to step through the pages for Product Status, 

Dagnostcs, and Actvaton. 

GDL 69/69A - FIS

Viewing TFR Text

Sorting TAF and METAR Text (Nearest Position Shown)

Summary of Contents for MX20

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands