190-00303-A3
GSB 15 Installation Manual
Rev. 3
Page 1-1
1 DECLARATION OF DESIGN AND PERFORMANCE
1.1 Introduction
The Declaration of Design and Performance section contains the definition and statement of compliance of
the GSB 15. The section is written in accordance with European Aviation Safety Agency (EASA)
Commission Regulation (EU) No 748/2012 date 3 August 2012.
The full manual is intended to provide mechanical and electrical information for use in the planning and
design of an installation of the GSB 15 into an aircraft. This manual is not a substitute for an approved
airframe-specific maintenance manual, installation design drawing, or complete installation data package.
Attempting to install equipment by reference to this manual alone and without first planning or designing
an installation specific to your aircraft may compromise your safety and it is not recommended. The
content of this manual assumes use by competent and qualified avionics engineering personnel and/or
avionics installation specialist using standard maintenance practices in accordance with Title 14 of the
Code of Federal Regulation and other relevant accepted practices. This manual is not intended for use by
individuals who do not possess the competencies and abilities set forth above.
NOTE
Garmin recommends installation of the GSB 15 by a Garmin-authorized installer. To the
extent allowable by law, Garmin will not be liable for damages resulting from improper or
negligent installation of the GSB 15. For questions, please contact Garmin Aviation
Product Support at 1-888-606-5482.
NOTE
Except where specifically noted, references to GSB 15 apply equally to all GSB 15
variants.
1.2 Description and Identification
The GSB 15 functions as a USB Database and Charging Hub that provides:
• Two (2) - USB Type A charging ports (low-current with data transfer or high-current without data
transfer)
• Optional software and database loading to compatible Garmin devices via USB
• Halo backlighting to facilitate nighttime usability