190-00303-A3
GSB 15 Installation Manual
Rev 3
Page B-1
APPENDIX B INTERCONNECT DRAWINGS
Figure B-1 GSB 15 Example Interconnect
6
5
4
3
2
1
AIRCRAFT POWER
BACKLIGHT ENABLE
USB GROUND
USB DN
USB DP
GSB 15
P201/
P202
J201/
J202
POWER GROUND
TO AIRCRAFT POWER
SEE NOTES 2 AND 3
NOTES:
1. USE 20 OR 22 AWG FOR AIRCRAFT POWER AND POWER GROUND WIRES, 25 ft MAX.
2. USE CAT 5 SHIELDED TWISTED PAIR WIRING, 6 ft MAX.
3. CONNECT TO CAT 5 SHIELD USING M83519 SOLDER SLEEVE (OR EQUIVALENT) 1” [2.54 cm] MAX FROM CONNECTOR.
SOLDER SLEEVES WITH PRE-INSTALLED LEADS ARE ACCEPTABLE.
4. TERMINATE CAT 5 SHIELD TO THE BACK OF THE GSB 15 USING THE RING TERMINAL AND RING TERMINAL
SCREW (P/N 235-00117-00 AND 211-60234-04).
5. SYMBOL DESIGNATIONS:
SEE NOTE 4
5A
SEE NOTE 1
SEE NOTE 1
AIRCRAFT GROUND
TWISTED SHIELDED PAIR
0.3" OF SHIELD FOLDED
BACK OVER JACKET
1.0" MAX
2.5" MAX FOR
SHIELD DRAIN
SHIELD TERMINATION