GSA 8X/GSM 85(A) Installation Manual
Page 3-11
190-00303-72
Revision R
5)
Wrap the cable around the fixture capstan approximately three and one half turns and then secure the
remaining swaged ball end of the cable in the bottom end slot of the unit capstan. See Figure 3-14.
Figure 3-14. Cable wrapped around test fixture capstan, remaining end installed in unit
capstan bottom slot
6)
With the cables properly installed, the solenoid switch can be turned off and the capstans rotated to
bring the cables to center of travel. See Figure 3-15. Continue to Section 3.3.7.5.
Figure 3-15. 3/32 Cable with retainer clips at center of travel
