GSA 8X/GSM 85(A) Installation Manual
Page 3-3
190-00303-72
Revision R
3.3.4
Required Equipment for Cable and Pulley Type Servo Gearbox
The following will be required to use the Garmin Slip-Clutch Fixture:
1)
Garmin Slip-Clutch Fixture (P/N T10-00110-01)
2)
Garmin cable (P/N 233-20016-00, 233-20002-00, or two 233-20003-00) included with fixture
3)
Torque wrench* capable of at least maximum setting desired for slip clutch
4)
13/16” socket to attach to torque wrench
5)
9/16” wrench for setting unit slip torque
6)
Garmin GSM 85(A) Servo Gearbox
7)
2 Amp, 24 V, DC Power Supply.
* Some torque wrenches only work properly when using a specific grip location, holding the
torque wrench in another location may give false readings. These types of torque wrenches may
NOT be used with this slip-clutch fixture. Recommended wrenches are the Snap-On Blue Point
TE6FUE (up to 75 in-lbs) or TE25FUE (up to 200 in-lbs).
The following may be required to make adjustments to the Garmin Slip-Clutch Fixture:
1)
3/8” sockets or wrenches
2)
7/16” sockets or wrenches
3)
#2 Phillips screwdriver
3.3.5
Required Equipment for Chain and Sprocket Type Servo Gearbox (also
for Universal Hub type)
The following will be required to use the Garmin Slip-Clutch Fixture:
1)
Garmin Slip-Clutch Fixture (P/N T10-00110-01)
2)
Garmin Chain (P/N 233-30001-01) included with fixture
3)
Garmin Sprocket (P/N 380-00015-00) included with fixture
4)
Garmin Sprocket (P/N 380-00015-20) included with fixture (required for adjustment of GSM
85(A) Universal Hub unit only)
5)
Garmin Sprocket Alignment Pins, 2 ea. (P/N 233-00071-03) included with fixture
6)
Garmin Sprocket Mounting Screws, 3 ea. (P/N 211-60234-09) included with fixture
7)
8-32 type screws, 6 ea. to attach Garmin Sprocket (P/N 380-00015-20) required for adjustment of
GSM 85(A) Universal Hub unit only
8)
Torque wrench* capable of at least maximum setting desired for slip clutch
9)
13/16” socket to attach to torque wrench
10)
9/16” wrench for setting unit slip torque
11)
#2 Phillips screwdriver for installing capstan sprocket
12)
Garmin GSM 85(A) Servo
13)
2 Amp, 24 V, DC Power Supply
* Some torque wrenches only work properly when using a specific grip location, holding the
torque wrench in another location may give false readings. These types of torque wrenches may
NOT be used with this slip-clutch fixture. Recommended wrenches are the Snap-On Blue Point
TE6FUE (up to 75 in-lbs) or TE25FUE (up to 200 in-lbs).
The following may be required to make adjustments to the Garmin Slip-Clutch Fixture:
1)
3/8” sockets or wrenches
2)
7/16” sockets or wrenches
