Garmin GPSMAP 902 series, Owner'S Manual

Page: 38 / 60

Viewing the Gauges
1
Select A/V, Gauges, Controls .
2
Select a gauge.
3
Select or to view a different gauge page.
Changing the Data Shown in a Gauge
1 From a gauges screen, hold a gauge.
2
Select Replace Data .
3
Select a data type.
4
Select the data to display.
Customizing the Gauges
You can change the layout of the gauge pages, how the gauges
pages are displayed, and the data in each gauge.
1
Open a gauge page.
2
Select Menu > Edit Gauge Pages .
3
Select an option:
• To change the data shown in a gauge, select the gauge.
• To change the layout of the gauges on the page, select
Change Layout .
• To add a page to this set of gauge pages, select Add
Page .
• To change the order of this page in the set of gauge
pages, select Move Page Left or Move Page Right .
• To restore this page to the original view, select Restore
Default View .
Customizing Engine Gauge and Fuel Gauge Limits
You can configure the upper and lower limits and the range of
desired standard operation of a gauge.
NOTE: Not all options are available for all gauges.
1
From an applicable gauges screen, select Menu >
Installation > Set Gauge Limits .
2
Select a gauge to customize.
3 Select an option:
• To set the minimum value of the standard operating
range, select Rated Min. .
• To set the maximum value of the standard operating
range, select Rated Max. .
• To set the lower limit of the gauge lower than the rated
minimum, select Scale Min. .
• To set the upper limit of the gauge higher than the rated
maximum, select Scale Max. .
4
Select the limit value.
5
Repeat steps 4 and 5 to set additional gauge limits.
Viewing Engine and Fuel Gauges
Before you can view engine and fuel gauges, you must be
connected to a NMEA 2000 network capable of sensing engine
and fuel data. See the installation instructions for details.
Select A/V, Gauges, Controls > Engines .
Selecting the Number of Engines Shown in Gauges
You can show information for up to four engines.
1
From the engine gauges screen, select Menu > Installation
> Engine Selection > Number of Engines .
2
Select an option:
• Select the number of engines.
• Select
Auto Configure to automatically detect the number
of engines.
Customizing the Engines Shown in Gauges
Before you can customize how the engines are shown in the
gauges, you must manually select the number of engines
( Selecting the Number of Engines Shown in Gauges , page 32 ).
1
From the engine gauges screen, select Menu > Installation
> Engine Selection > Edit Engines .
2
Select First Engine .
3
Select the engine to display in the first gauge.
4
Repeat for the remaining engine bars.
Enabling Status Alarms for Engine Gauges
You can enable the chartplotter to display engine status alarms.
From the engine gauges screen, select Menu > Installation
> Status Alarms > On .
When an engine alarms is triggered, a gauge status alarm
message appears and the gauge may become red depending
on the type of alarm.
Enabling Some Engine Gauge Status Alarms
1 From the engine gauges screen, select Menu > Installation
> Status Alarms > Custom .
2
Select one or more engine gauge alarms to turn on or off.
Setting the Fuel Alarm
Before you can set a fuel level alarm, a compatible fuel flow
sensor must be connected to the chartplotter.
You can set an alarm to sound when the total amount of
remaining onboard fuel reaches the level you specify.
1
Select Settings > Alarms > Fuel > Set Total Fuel Onboard
> On .
2
Enter the remaining amount of fuel that triggers the alarm,
and select Done .
Setting the Fuel Capacity of the Vessel
1
Select Settings > My Vessel > Fuel Capacity .
2
Enter the combined total capacity of the fuel tanks.
Synchronizing the Fuel Data with the Actual Vessel
Fuel
You can synchronize the fuel levels in the chartplotter with the
actual fuel in the vessel when you add fuel to your vessel.
1
Select A/V, Gauges, Controls > Engines > Menu .
2
Select an option:
• After you have filled up all the fuel tanks on the vessel,
select Fill Up All Tanks . The fuel level is reset to
maximum capacity.
• After you have added less than a full tank of fuel, select
Add Fuel to Boat , and enter the amount added.
• To specify the total fuel in the vessel tanks, select Set
Total Fuel Onboard , and enter the total amount of fuel in
the tanks.
Viewing the Wind Gauges
Before you can view wind information, you must have a wind
sensor connected to the chartplotter.
Select A/V, Gauges, Controls > Wind .
Configuring the Sailing Wind Gauge
You can configure the sailing wind gauge to show true or
apparent wind speed and angle.
1 From the wind gauge, select Menu > Sailing Wind Gauge .
2
Select an option:
• To show true or apparent wind angle, select
Needle , and
select an option.
32 Gauges and Graphs