background image

NOTE: 

Mariner's Eye 3D and Fish Eye 3D chart views are 

available with premium charts, in some areas.

Fish Eye 3D

: Provides an underwater view that visually 

represents the sea floor according to the chart information. 

When a sonar transducer is connected, suspended targets 

(such as fish) are indicated by red, green, and yellow 

spheres. Red indicates the largest targets and green 

indicates the smallest.

Fishing Chart

: Provides a detailed view of the bottom contours 

and depth soundings on the chart. This chart removes 

navigational data from the chart, provides detailed 

bathymetric data, and enhances bottom contours for depth 

recognition. This chart is best for offshore deep-sea fishing.

NOTE: 

The offshore Fishing chart is available with premium 

charts, in some areas.

Radar Overlay

: Superimposes radar information on the 

Navigation chart or the Fishing chart, when the chartplotter is 

connected to a radar. This feature is not available with all 

models.

Navigation Chart and Offshore Fishing Chart

NOTE: 

The offshore Fishing chart is available with premium 

charts, in some areas.
The Navigation and Fishing charts allow you to plan your 

course, view map information, and follow a route. The Fishing 

chart is for offshore fishing.
To open the Navigation chart, select 

Charts

 > 

Nav. Chart

.

To open the Fishing chart, select 

Charts

 > 

Fishing Chart

.

Zooming In and Out Using the Touchscreen

You can quickly zoom in and out of many screens, such as the 

charts and sonar views.
• Pinch two fingers together to zoom out.
• Spread two fingers apart to zoom in.

Selecting a Map

If your product has both BlueChart

®

 g2 and Garmin LakeVü

 HD 

built-in maps, you can select which map to use. Not all models 

have both types of built-in maps.

1

From the Navigation chart, select 

Menu

 > 

Built-In Map

.

2

Select an option:
• When you are on an inland lake, select 

LakeVü™ HD

.

• When you are offshore, select 

BlueChart® g2

.

Measuring a Distance on the Chart

1

From a chart or the Radar overlay, select a location.

2

Select 

Measure Distance

.

A push pin appears on the screen at your present location. 

The distance and angle from the pin is listed in the upper-left 

corner.

TIP: 

To reset the pin and measure from the current location of 

the cursor, select Set Reference.

Chart Symbols

This table contains some of the common symbols you might see 

on the detailed charts.

Icon

Description

Buoy

Information

Marine services

Tide station

Current station

Overhead photo available

Perspective photo available

Other features common to most charts include depth contour 

lines, intertidal zones, spot soundings (as depicted on the 

original paper chart), navigational aids and symbols, 

obstructions, and cable areas.

Creating a Waypoint on the Chart

1

From a chart or a 3D chart view, select a location or object.

2

Select 

Create Waypoint

 or  .

Viewing Location and Object Information on a Chart

You can view information about a location or an object on the 

Navigation chart or the Fishing chart.

NOTE: 

The offshore Fishing chart is available with premium 

charts, in some areas.

1

From the Navigation chart or Fishing chart, select a location 

or object.
A list of options appears along the right side of the chart. The 

options that appear vary based on the location or object you 

selected.

2

Select an option:
• To navigate to the selected location, select 

Navigate To

.

• To mark a waypoint at the cursor location, select 

Create 

Waypoint

.

• To view the distance and bearing of the object from your 

current location, select 

Measure Distance

.

The distance and bearing appear on the screen. Select 

Select

 to measure from a location other than your current 

location.

• To view tide, current, celestial, chart notes, or local 

services information near the cursor, select 

Information

.

Viewing Details about Navaids

From the Navigation chart, Fishing chart, Perspective 3D chart 

view, or Mariner’s Eye 3D chart view, you can view details about 

various types of navigation aids, including beacons, lights, and 

obstructions.

NOTE: 

The offshore Fishing chart is available with premium 

charts, in some areas.

NOTE: 

Mariner's Eye 3D and Fish Eye 3D chart views are 

available with premium charts, in some areas.

1

From a chart or 3D chart view, select a navaid.

2

Select the name of the navaid.

Navigating to a Point on the Chart

 CAUTION

The Auto Guidance feature is based on electronic chart 

information. That data does not ensure obstacle and bottom 

clearance. Carefully compare the course to all visual sightings, 

and avoid any land, shallow water, or other obstacles that may 

be in your path.
When using Go To, a direct course and a corrected course may 

pass over land or shallow water. Use visual sightings, and steer 

to avoid land, shallow water, and other dangerous objects.

4

Charts and 3D Chart Views

Summary of Contents for GPSMAP 902 series





























































Reviews: