background image

Other Vessels Layer Settings

NOTE: 

These options require connected accessories, such as 

an AIS receiver, radar, or VHF radio.
From a chart, select 

Menu

 > 

Layers

 > 

Other Vessels

.

DSC

: Sets how DSC vessels and trails appear on the chart, and 

shows the DSC list.

AIS

: Sets how AIS vessels and trails appear on the chart, and 

shows the AIS list.

MARPA

: Sets how MARPA vessels and trails appear on the 

chart, and shows the MARPA list.

Details

: Shows other vessel details on the chart.

Proj. Heading

: Sets the projected heading time for AIS-

activated and MARPA-tagged vessels.

Collision Alarm

: Sets the safe-zone collision alarm (

Setting the 

Safe-Zone Collision Alarm

, page 8

).

Water Layer Settings

From a chart, select 

Menu

 > 

Layers

 > 

Water

.

Depth Shading

: Specifies an upper and lower depth to shade 

between.

Shallow Shading

: Sets the shades from the shoreline to the 

specified depth.

Spot Depths

: Turns on spot soundings and sets a dangerous 

depth. Spot depths that are equal to or more shallow than the 

dangerous depth are indicated by red text.

Fishing Contours

: Sets the zoom level for a detailed view of 

bottom contours and depth soundings and simplifies map 

presentation for optimal use while fishing.

Relief Shading

: Shows the gradient of the bottom with shading. 

This feature is available only with some premium maps.

Sonar Imagery

: Shows sonar imagery to help show the density 

of the bottom. This feature is available only with some 

premium maps.

Lake Level

: Sets the present water level of the lake. This 

feature is available only with some premium maps.

Weather Layer Settings

From the Navigation or Fishing chart, select 

Menu

 > 

Layers

 > 

Chart

 > 

Weather

 >  .

From a weather chart, select 

Menu

 > 

Layers

 > 

Chart

 > 

Weather

.

Observed Layers

: Sets which observed weather items are 

shown. Observed weather is the present weather condition 

that are visible now.

Forecast Layers

: Sets which forecasted weather items are 

shown.

Layer Mode

: Shows forecasted or observed weather 

information.

Loop

: Shows a loop of forecasted or observed weather 

information.

Legend

: Shows the weather legend, with the severity of the 

conditions increasing from left to right.

Weather Subscription

: Shows weather subscription 

information.

Restore Defaults

: Resets the weather settings to factory default 

values.

Edit Overlays

: Adjusts the data shown on the screen 

(

Customizing the Data Overlays

, page 3

).

Radar Overlay Settings

From the Navigation or Fishing chart, select 

Menu

 > 

Layers

 > 

Radar

 >  .

From a radar screen, select 

Menu

.

Radar To Standby

: Stops radar transmission.

Gain

: Adjusts the gain (

Adjusting Gain on the Radar Screen 

Automatically

, page 30

).

Sea Clutter

: Adjusts the sea clutter (

Adjusting Gain on the 

Radar Screen Automatically

, page 30

).

Radar Options

: Opens the radar options menu (

Radar Options 

Menu

, page 31

).

Other Vessels

: Sets how other vessels are displayed on the 

radar view (

Other Vessels Layer Settings

, page 10

).

Radar Setup

: Opens the radar display settings (

Radar Setup 

Menu

, page 32

).

Edit Overlays

: Adjusts the data shown on the screen 

(

Customizing the Data Overlays

, page 3

).

Chart Settings

NOTE: 

Not all settings apply to all charts and 3D chart views. 

Some settings require external accessories or applicable 

premium charts.
From a chart, select 

Menu

 > 

Settings

.

Orientation

: Sets the perspective of the map.

Detail

: Adjusts the amount of detail shown on the map, at 

different zoom levels.

World Map

: Uses either a basic world map or a shaded relief 

map on the chart. These differences are visible only when 

zoomed out too far to see the detailed charts.

Start Line

: Sets the starting line for the sailing race.

Inset Map

: Shows a small map centered on your present 

location.

Fish Eye 3D Settings

NOTE: 

This feature is available with premium charts, in some 

areas.
From the Fish Eye 3D chart view, select Menu.

View

: Sets the perspective of the 3D chart view.

Tracks

: Shows tracks.

Sonar Cone

: Shows a cone that indicates the area covered by 

the transducer.

Fish Symbols

: Shows suspended targets.

Supported Maps

To help you have a safe and enjoyable time on the water, 

Garmin devices only support official maps produced by Garmin 

or an approved third party producer.
You can purchase maps from Garmin. If you purchase maps 

from a seller other than Garmin, investigate the seller before 

purchasing. Be extra cautious with online sellers. If you have 

purchased an unsupported map, return it to the seller.

Garmin Quickdraw Contours Mapping

 WARNING

The Garmin Quickdraw Contours mapping feature allows users 

to generate maps. Garmin makes no representations about the 

accuracy, reliability, completeness or timeliness of the maps 

generated by third parties. Any use or reliance on the maps 

generated by third parties is at your own risk.
The Garmin Quickdraw Contours mapping feature allows you to 

instantly create maps with contours and depth labels for any 

body of water.
When Garmin Quickdraw Contours records data, a colored 

circle surrounds the vessel icon. This circle represents the 

approximate area of the map that is scanned by each pass.

10

Garmin Quickdraw Contours Mapping

Summary of Contents for GPSMAP 8500



































































Reviews: