background image

GPS

: Provides information about the GPS satellites and 

settings.

System Information

: Provides information about the devices on 

the network and the software version.

Station Information

: Adjusts the setup of the station.

Auto Power Up

: Controls which devices turn on automatically 

when power is applied.

Auto Power Off

: Automatically turns off the system after it has 

been asleep for the selected length of time.

Simulator

: Turns the simulator on or off and allows you to set 

the time, date, speed, and simulated location.

Sounds and Display Settings

Select 

Settings

 > 

System

 > 

Sounds and Display

.

Beeper

: Turns on and off the tone that sounds for alarms and 

selections.

Backlight

: Sets the backlight brightness. You can select the 

Auto option to adjust the backlight brightness automatically 

based on the ambient light.

Backlight Sync

: Synchronizes the backlight brightness of other 

chartplotters in the station.

Color Mode

: Sets the device to display day or night colors. You 

can select the Auto option to allow the device to set day or 

night colors automatically based on the time of day.

Startup Image

: Sets the image that appears when you turn on 

the device.

GPS Settings

Select 

Settings

 > 

System

 > 

GPS

.

Skyview

: Shows the relative position of GPS satellites in the 

sky.

Settings > Speed Filter

: Averages the speed of your vessel 

over a short period of time for smoother speed values.

Settings > WAAS/EGNOS

: Turns on or off WAAS (in North 

America) or EGNOS (in Europe), which can provide more-

accurate GPS position information. When using WAAS or 

EGNOS, the device may take longer to acquire satellites.

Settings > GLONASS

: Turns on or off GLONASS usage 

(Russia satellite system). When the system is used in 

situations with poor sky visibility, this configuration can be 

used in combination with GPS to provide more accurate 

position information.

Source

: Allows you to select the preferred source for GPS.

Station Settings

Select 

Settings

 > 

System

 > 

Station Information

.

Change Station

: Sets the entire station to a new set of defaults 

based on the location of this station. You can also select to 

use this display as a stand-alone, individual display, instead 

of grouping it with other displays to make a station.

GRID™ Pairing

: Allows you to pair a GRID

 remote input 

device with this station.

Display Order

: Sets the order of the displays, which is 

important when using a GRID remote input device.

Autopilot Enabled

: Allows you to control the autopilot from this 

device.

Reset Layouts

: Restores the factory default view for the layouts 

in this station.

Reset Stations

: Restores the factory default layouts for all 

displays in the station.

Viewing System Software Information

You can view the software version, the basemap version, all 

supplemental map information (if applicable), the software 

version for an optional Garmin radar (if applicable), and the unit 

ID number. You may need this information to update the system 

software or to purchase additional map data information.

Select 

Settings

 > 

System

 > 

System Information

 > 

Software Information

.

Viewing the Event Log

The event log shows a list of system events.

Select 

Settings

 > 

System

 > 

System Information

 > 

Event 

Log

.

Preferences Settings

Select 

Settings

 > 

Preferences

.

Units

: Sets units of measure.

Language

: Sets the on-screen text language.

Navigation

: Sets navigation preferences.

Keyboard Layout

: Arranges the keys on the on-screen 

keyboard.

Screenshot Capture

: Allows the device to save images of the 

screen.

User Data Sharing

: Allows you to share waypoints and routes 

over the Garmin Marine Network. All chartplotters that share 

waypoints and routes must have this setting turned on.

Menu Bar Display

: Shows or automatically hides the menu bar 

when it is not needed.

Units Settings

Select 

Settings

 > 

Preferences

 > 

Units

.

System Units

: Sets the unit format for the device.

Variance

: Sets the magnetic declination, the angle between 

magnetic north and true north, for your present location.

North Reference

: Sets the direction references used in 

calculating heading information. True sets geographic north 

as the north reference. Grid sets grid north as the north 

reference (000º). Magnetic sets the magnetic north as the 

north reference.

Position Format

: Sets the position format in which a given 

location reading appears. Do not change this setting unless 

you are using a map or chart that specifies a different 

position format.

Map Datum

: Sets the coordinate system on which the map is 

structured. Do not change this setting unless you are using a 

map or chart that specifies a different map datum.

Time

: Sets the time format, time zone, and daylight saving time.

Navigation Settings

NOTE: 

Some settings and options require additional charts or 

hardware.
Select 

Settings

 > 

Preferences

 > 

Navigation

.

Route Labels

: Sets the type of labels shown with route turns on 

the map.

Turn Transition

: Adjusts how the chartplotter transitions to the 

next turn or leg or the route. You can set the transition to be 

based on time or distance before the turn. You can increase 

the time or distance value to help improve the accuracy of the 

autopilot when navigating a route or an Auto Guidance line 

with many frequent turns or at higher speeds. For straighter 

routes or slower speeds, lowering this value can improve 

autopilot accuracy.

Speed Sources

: Sets the source for the speed readings.

Auto Guidance

: Sets the measurements for the Preferred 

Depth, Vertical Clearance, and Shoreline Distance, when you 

are using some premium maps.

Route Start

: Selects a starting point for route navigation.

46

Device Configuration

Summary of Contents for GPSMAP 8500



































































Reviews: