Garmin GPSMAP 496, Owner'S Manual

Page: 123 / 196

Sound Tab
The Sound tab allows you to customize the sounds your
GPSMAP 496 makes to suit your needs.
To view the Sound tab:
1. Press MENU twice to open the Main Menu.
2. Highlight Sound from the vertical list of tabs.
Sound Tab
Beeper —sets the beeper to chime during key presses and alarms
( Key and Alarm ) or Alarms Only .
Attention Tone
—turns the attention tone that sounds before the
vocal prompts on and off.
Voice Prompt —sets the vocal prompt to operate for Guidance and
Status
,
Route Guidance Only
, or
No Voice Prompts
.
Terrain Audio (Aviation Mode)—turns audible terrain alerts on
and off. Also enables or disables the audible “Five hundred” altitude
reminder that occurs when you descend through 500 feet above the
destination airport.
TIS Audio
(Aviation Mode)—turns audible TIS traffic alerts on
and off.
Audio Volume —sets the external speaker volume (when used).
Press the ROCKER right to increase the volume or left to decrease.
Audio Jack —sets the type of audio signal generated from the unit's
external audio jack. Use
Line Out
(default) to connect to your
headsets or audio panel. Use Headphones for connecting directly to
a pair of personal stereo headphones.
To restore the sound to defaults:
1. Press MENU twice to open the Main Menu.
2. Highlight
Sound
from the vertical list of tabs.
3. Press MENU .
4. Highlight
Restore Defaults
, and press
ENTER
.
GPSMAP 496 Owner’s Manual 115
M
AIN
M
ENU
> S
OUND
T
AB