Garmin GNS 530 Pilot'S Manual & Reference Download Page 42

Page: 42 / 288

GNS 530(A) Pilot’s Guide and Reference

190-00181-00 Rev. H

SECTION 3

NAV PAGES

3-6

3.4 MAP PAGE

The second NAV page is the Map Page (Figure 3-9),

which displays the present position using an airplane

symbol, along with nearby airports, NAVAIDS, user-

defined waypoints, airspace boundaries, lakes, rivers,
highways, and cities.

Figure 3-9 Map Page

Present

Position

Desired Track

Map Range

Map Display

Current Page Group

Number of Pages in

Current Page Group

Position of Current

Page within Current

Page Group

NOTE: If the GNS 530 is unable to determine
a GPS position, the present position (airplane)
symbol does not appear on the Map Page.

Different

symbols are used to distinguish between

waypoint types. The identifiers for any on-screen

waypoints can also be displayed. (The identifiers are
enabled by default.) Special-use and controlled airspace

boundaries appear on the map, showing the individual

sectors for Class B, Class C, and Class D airspaces.

Table 3-3 shows the symbols used to depict the various

airports and NAVAIDS on the Map Page:

Symbol

Description

Airport with hard surface runway(s); (primary
runway shown)
Airport with soft surface runway(s) only

Private Airfield

Heliport

VOR

VOR/DME

DME

Localizer

Intersection

VORTAC

TACAN

NDB

Locator Outer Marker

Table 3-3 Map Page Symbols

The Map Display can be set to 23 different range set

tings from 500 feet to 2000 nautical miles (statute and
metric units are also available). The range is indicated
in the lower left-hand corner of the Map Display (Figure

3-9), and represents the top-to-bottom distance covered
by the Map Display.

Selecting a map range:

1) Press the up arrow of the

RNG

Key to zoom

out to a larger map area.

2) Press the down arrow of the

RNG

Key to zoom

in to a smaller map area and more detail.

Summary of Contents for GNS 530

































































































































































































































































































Search results

Summary of Contents for GNS 530

Reviews:

Brands by name

Popular brands

Garmin GNS 530, Pilot'S Manual & Reference

Search results

Summary of Contents for GNS 530

Reviews:

Brands by name

Popular brands