manualshive.com logo in svg

Garmin GNS 530, Pilot'S Manual & Reference

Share
Download
Garmin GNS 530 Pilot'S Manual & Reference Download Page 121

GNS 530(A) Pilot’s Guide and Reference

190-00181-00  Rev. H

7-5

SECTION 7 

WPT PAGES

The  following  descriptions  and  abbreviations  are 

used:

•  Type - Usage type: Public, Heliport, Military, or 

Private

•  Position - Latitude/Longitude (degrees/minutes or 

degrees/minutes/seconds), MGRS, or UTM/UPS

•  Elevation - In feet or meters
•  Fuel - For public-use airports, the available fuel 

type(s) are: Avgas (80-87/100LL/100-130/Mogas), 

Jet, or None

•  Approach - Best available approach: ILS, MLS, 

LOC, LDA, SDF, GPS, VOR, RNAV (‘RNV’), 
LORAN (‘LOR’), NDB, TACAN (‘TCN’), 
Helicopter (‘HEL’), or VFR

•  Radar - Radar coverage: Yes or No
•  Airspace - Control environment: Class B, Class C, 

Class D, CTA, TMA, TRSA, or none

 

NOTE:    Upon  active  navigation  changes,  the 
active destination airport is used as the default 
airport on the WPT pages.  Manual selection of 
the destination airport is available from the page 
menu.

Airport Location Page Options

The  following  options  are  available  for  the  Airport 

Location Page, by pressing the 

MENU

 Key:

•  Select Next FPL Apt? - This option is only 

available when a Flight Plan is active.  Allows the 
pilot to view the location information for the next 

airport in the active flight plan

•  Select Destination Apt? - This option is only 

available when a Flight Plan is active.  Allows 

the pilot to view the location information for the 
active flight plan destination airport.

Selecting an Airport Location Page Menu 
Option:

1)  With  a  Flight  Plan  active,  select  the Airport 

Location Page.

2)  Press  the 

MENU

  Key  to  display  the Airport 

Location Page Menu.

3)  Turn the large 

right

 knob to highlight ‘Select 

Next FPL Apt?’ or ‘Select Destination Apt?’ and 
press the 

ENT

 Key (Figure 7-8). 

Figure 7-8  Airport Location Page Menu

4)  The Airport Location Page displays information 

regarding the next Flight Plan or Destination 
Airport.

Summary of Contents for GNS 530

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands