Garmin GNS 530 Pilot'S Manual & Reference Download Page 123

Page: 123 / 288

GNS 530(A) Pilot’s Guide and Reference

190-00181-00 Rev. H

7-7

SECTION 7

WPT PAGES

Adjusting the range of the map image:

1) Press the down arrow of the

RNG

Key to

display a smaller map area.

2) Press the up arrow of the

RNG

Key to display

a larger map area.

The following descriptions and abbreviations are used

on the Airport Runway Page:

• Type - Usage type: Public, Heliport, Military, or

Private

• Surface - Runway surface types include: Hard,

Turf, Sealed, Gravel, Dirt, Soft, Unknown, or
Water

• Lighting - Runway lighting types include: No

Lights, Part Time, Full Time, Unknown, or
Frequency (for pilot-controlled lighting)

Airport Runway Page Options

The following options are available for the Airport

Runway Page, by pressing the

Key:

• Select Next FPL Apt? - This option is only

available when a Flight Plan is active. Allows the
pilot to view the runway information for the next

airport in the active flight plan

• Select Destination Apt? - This option is only

available when a Flight Plan is active. Allows the

pilot to view the runway information for the active
flight plan destination airport.

Selecting an Airport Runway Page Menu
Option:

1) With a Flight Plan Active, select the Airport

Runway Page.

2) Press the

MENU

Key to display the Airport

Runway Page Menu.

3) Turn the large

right

knob to highlight ‘Select

Next FPL Apt?’ or ‘Select Destination Apt?’ and
press the

ENT

Key (Figure 7-12).

Figure 7-12 Airport Runway Page Menu

4) The Airport Runway Page displays information

regarding the next Flight Plan or Destination
Airport.

Summary of Contents for GNS 530

































































































































































































































































































Search results

Summary of Contents for GNS 530

Reviews:

Brands by name

Popular brands

Garmin GNS 530, Pilot'S Manual & Reference

Search results

Summary of Contents for GNS 530

Reviews:

Brands by name

Popular brands