Garmin GNS 480, Installation Manaul

Page: 193 / 200

Appendix E – Acceptable Aircraft by Evaluation
GNS 480 (CNX80) Installation Manual 560-0982-01 Rev L E-1
APPENDIX E -
ACCEPTABLE AIRCRAFT BY EVALUATION
In certain instances, aircraft on the Approved Model List have a center radio stack located outside of the
acceptable field-of-view defined herein. For these particular installations, additional FAA approval will be
required. Below is a listing of such aircraft that have already been evaluated by the FAA and determined
to be acceptable. No further approval will be required for these aircraft provided the criteria in the
Installation Requirements column are satisfied by the installation.
Aircraft Make and Model
Designation Installation Requirements
Raytheon
(Beech)
E33, E33A, E33C, F33,
F33A, F33C, G33
The GNS 480 must be installed in the manufacturer’s provided avionics stack.
External CDI/HSI source selection annunciation is required.
The CDI/HSI
source select annunciation must be installed in accordance with 2.5.3.2.
35-B33, 35-C33, 35-C33A,
P35, S35, V35, V35A,
V35B
The GNS 480 must be installed in the manufacturer’s provided avionics stack.
External CDI/HSI source selection annunciation is required.
The CDI/HSI
source select annunciation must be installed in accordance with 2.5.3.2.
36, A36, A36TC, B36TC
The GNS 480 must be installed in the manufacturer’s provided avionics stack.
External CDI/HSI source selection annunciation is required.
The CDI/HSI
source select annunciation must be installed in accordance with 2.5.3.2.
D55, D55A, E55, E55A
The GNS 480 must be installed high enough in the manufacturer’s provided
avionics stack so that there is a clear, unobstructed view of the display.
External CDI/HSI source selection annunciation is required.
The CDI/HSI
source select annunciation must be installed in accordance with 2.5.3.2.
56TC, A56TC
The GNS 480 must be installed high enough in the manufacturer’s provided
avionics stack so that there is a clear, unobstructed view of the display.
External CDI/HSI source selection annunciation is required.
The CDI/HSI
source select annunciation must be installed in accordance with 2.5.3.2.
58, 58A, 58P, 58PA, 58TC,
58TCA
The GNS 480 must be installed high enough in the manufacturer’s provided
avionics stack so that there is a clear, unobstructed view of the display.
External CDI/HSI source selection annunciation is required.
The CDI/HSI
source select annunciation must be installed in accordance with 2.5.3.2.
95, 95-55, 95-A55,
95-B55, 95-B55A,
95-C55, 95-C55A, B95,
B95A, D95A, E95
The GNS 480 must be installed high enough in the manufacturer’s provided
avionics stack so that there is a clear, unobstructed view of the display.
External CDI/HSI source selection annunciation is required.
The CDI/HSI
source select annunciation must be installed in accordance with 2.5.3.2.