Garmin GNS 430 Pilot'S Manual & Reference Download

Page: 145 / 266

GNS 430(A) Pilot’s Guide and Reference

190-00140-00 Rev. P

8-5

SECTION 8

NRST PAGES

5) Press the

COM Flip-flop

Key to activate the

selected frequency (Figure 8-12).

Figure 8-12 Frequency Moved to Active Field

6) Press the small

right

knob to remove the

flashing cursor.

Additional communication frequencies,

runway infor-

mation, and more is available from the

Nearest Airport

Page by highlighting the identifier of the desired airport

and pressing the

ENT

Key.

To view additional information for a nearby
airport:

1) Select the Nearest Airport Page, using the steps

outlined in Section 8.1.

2) Press the small

right

knob to activate the

cursor.

3) Turn the large

right

knob to scroll through the

list, highlighting the identifier of the desired
airport (Figure 8-13).

Figure 8-13 Desired Airport Highlighted

4) Press the

ENT

Key to display the Airport

Location Page for the selected airport (Figure
8-14).

Figure 8-14 Airport Location Page

5) To view additional WPT pages for the selected

airport (including the Airport Runway Page and
the Airport Frequency Page) press the small

right

knob to remove the flashing cursor. Turn

the small

right

knob to display the additional

WPT pages (Figure 8-15). When finished, press
the small

right

knob to return the flashing

cursor to the screen.

Figure 8-15 Additional WPT Page

6) To return to the Nearest Airport Page, verify

that ‘Done?’ is highlighted by the flashing
cursor and press the

ENT

Key (or press the

CLR

Key).

Summary of Contents for GNS 430











































































































































































































































































Search results

Summary of Contents for GNS 430

Reviews:

Related manuals for GNS 430

Brands by name

Popular brands

Garmin GNS 430, Pilot'S Manual & Reference

Search results

Summary of Contents for GNS 430

Reviews:

Related manuals for GNS 430

Brands by name

Popular brands