Garmin GNS 430 Pilot'S Manual & Reference Download

Page: 120 / 266

GNS 430(A) Pilot’s Guide and Reference

190-00140-00 Rev. P

7-4

SECTION 7

WPT PAGES

7.2 AIRPORT LOCATION PAGE

The

Airport Location Page (Figure 7-8) displays the

latitude, longitude, and elevation of the selected airport.
The

Airport Location Page also displays facility name and

location, as well as fuel availability, available approaches,
radar coverage, and airspace type.

Figure 7-8 Airport Location Page

Position (Latitude/Longitude)

Facility Name and Location (City)

Radar Coverage

Airport Identifier, Symbol, and Type

Field Elevation and Available Fuels

Airspace Type

Best Available Approach

Current Page Group

Position of Current Page within Current
Page Group

Number of Pages in Current Page Group

The following descriptions and abbreviations are

used:

• Type - Usage type: Public, Heliport, Military, or

Private

• Position - Latitude/Longitude (degrees/minutes or

degrees/minutes/seconds), MGRS, or UTM/UPS

• Elevation - In feet or meters
• Fuel - For public-use airports, the available fuel

type(s) are: Avgas (80-87/100LL/100-130/Mogas),

Jet, or None

• Approach - Best available approach: ILS, MLS,

LOC, LDA, SDF, GPS, VOR, RNAV (‘RNV’),
LORAN (‘LOR’), NDB, TACAN (‘TCN’),
Helicopter (‘HEL’), or VFR

• Radar - Radar coverage: Yes or No
• Airspace - Control environment: Class B, Class C,

Class D, CTA, TMA, TRSA, or none

Summary of Contents for GNS 430











































































































































































































































































Search results

Summary of Contents for GNS 430

Reviews:

Related manuals for GNS 430

Brands by name

Popular brands

Garmin GNS 430, Pilot'S Manual & Reference

Search results

Summary of Contents for GNS 430

Reviews:

Related manuals for GNS 430

Brands by name

Popular brands