background image

GNS 430 Quick Reference

SELECT AN APPROACH

18

TO EDIT A FLIGHT PLAN

1)  Press the 

FPL

 Key and turn the small 

right

 

knob to display the Flight Plan Catalog Page.

2)  Press  the  small 

right

  knob  to  activate  the 

cursor.

3)  Turn  the  large 

right

  knob  to  highlight  the 

desired flight plan and press the 

ENT

 Key.

4)  To add a waypoint to the flight plan: Turn the 

large 

right

 knob to select the point to add 

the new waypoint.  (If an existing waypoint is 
highlighted, the new waypoint is placed directly 
in front of this waypoint.)

  a)  Use the small and large 

right

 knobs to enter 

the identifier of the new waypoint and press 
the 

ENT

 Key.

5)  To delete a waypoint from the flight plan: Turn 

the large 

right

 knob to select the waypoint to 

be deleted and press the 

CLR

 Key to display a 

‘remove waypoint’ confirmation window.

  a)  With ‘Yes’ highlighted, press the 

ENT

 key to 

remove the waypoint.

6)  Once all changes have been made, press the 

small 

right

 knob to return to the Flight Plan 

Catalog Page.

TO SELECT AN APPROACH

1)  Press the 

PROC

 Key to display the Procedures 

Page.

2)  Turn the large 

right

 knob to highlight ‘Select 

Approach?’ and press the 

ENT

 Key.

3)  A  window  appears  listing  the  available 

procedures.   Turn  the  large 

right

  knob  to 

highlight the desired procedure and press the 

ENT

 Key.

4)  A second window appears listing the available 

transitions.   Turn  the  large 

right

  knob  to 

highlight the desired transition waypoint and 
press the 

ENT

 Key.  (The approach ‘Vectors’ 

option assumes the pilot will receive vectors 
to the final course segment of the approach 
and will provide navigation guidance relative 
to the final approach course.)

Summary of Contents for GNS 430























Reviews: