Garmin GNC 420, Pilot'S Manual & Reference

Page: 65 / 258

GNC 420(A) Pilot’s Guide and Reference
4-3
SECTION 4
DIRECT-TO NAVIGATION
190-00140-20 Rev. K
Selecting a direct-to destination from the
active flight plan:
1) Press the Direct-to Key. The Select Direct-to
Waypoint Page appears, with the waypoint
identifier field highlighted.
2) Turn the large right knob to highlight the flight
plan (FPL) field (Figure 4-6).
Figure 4-6 Highlighted Flight Plan Field
3) Turn the small
right
knob to display a window
showing all waypoints in the active flight plan
(Figure 4-7).
Figure 4-7 FPL (Flight Plan) Window
4) Continue turning the small right knob to
scroll through the list and highlight the desired
waypoint.
5) Press the
ENT
Key to confirm the selected
waypoint, and press the ENT Key again to
activate the direct-to function.
Selecting the Nearest Airport as a Direct-to
Destination
The Select Direct-to Waypoint Page always displays the
nearest airports (from the present position) in the NRST
field. Nearby airports may also be selected as direct-to
destinations using the steps described in Section 8.1.
Selecting a nearby airport as a direct-to
destination:
1) Press the Direct-to Key. The Select Direct-to
Waypoint Page appears, with the waypoint
identifier field highlighted.
2) Turn the large
right
knob to highlight the
nearest airport (NRST) field.
3) Turn the small
right
knob to display a window
showing up to nine nearby airports (Figure 4-8).
Figure 4-8 Nearest Window
4) Continue turning the small right knob to
scroll through the list and highlight the desired
airport.
5) Press the
ENT
Key to confirm the selected air-
port, and press the ENT Key again to activate
the direct-to function.