Garmin GNC 420 Page 125 Pilot'S Manual & Reference Download

Page: 125 / 258

GNC 420(A) Pilot’s Guide and Reference

7-15

SECTION 7

WPT PAGES

7.9 NDB PAGE

The

NDB Page displays the facility name, city,

region/country, latitude, and longitude for the selected

NDB (Figure 7-32). The NDB Page also displays

the frequency and a

weather broadcast indication (if

applicable). As mentioned in Section 7.1, NDBs may be
selected by identifier, facility name, or location (city).

Figure 7-32 NDB Page

NDB Identifier

and Symbol

Facility

Name, City,

and Region/

Country

Frequency

and Weather

Broadcast

Indication

Latitude/Longitude

Position

Position of Current Page

within Current Page Group

Number of Pages in

Current Page Group

Current

Page Group

The following descriptions and abbreviations are

used:

• Symbol - See Section 3.4 for a graphic illustration

of available

NDB

symbols

• Position -Latitude/Longitude (degrees/minutes or

degrees/minutes/seconds), MGRS, or UTM/UPS

• FREQ -Frequency in kilohertz (kHz)
• Wx Brdcst -Weather information is broadcast on

the selected facility’s frequency

7.10 VOR PAGE

The

VOR Page (Figure 7-33) displays the facility

name, city, region/country, magnetic variation, latitude,

and longitude for the selected VOR. The VOR Page also

displays the frequency and a weather broadcast indication

(if applicable).

Figure 7-33 VOR Page

VOR Identifier

and Symbol

Facility Name,

City, and Region/

Country

Frequency

and Weather

Broadcast

Indication

Latitude/Longitude

Position

Magnetic

Variation

Position of Current Page

within Current Page Group

Number of Pages in

Current Page Group

Current

Page Group

The following descriptions and abbreviations are

used:

• Symbol - See Section 3.4 for a graphic illustration

of available VOR

symbols

• VAR - Magnetic variation in degrees
• Position - Latitude/Longitude (degrees/minutes or

degrees/minutes/seconds), MGRS, or UTM/UPS

• FREQ - Frequency in megahertz (MHz)
• Wx Brdcst - Weather information is broadcast on

the selected facility’s frequency

As mentioned in Section 7.1, VORs may be selected

by identifier, facility name, or location (city). The VOR

frequency is provided for reference only to help quickly tune

the external VLOC receiver to the selected VOR’s frequency.

190-00140-20 Rev. K

Summary of Contents for GNC 420



































































































































































































































































Search results

Summary of Contents for GNC 420

Reviews:

Related manuals for GNC 420

Brands by name

Popular brands

Garmin GNC 420, Pilot'S Manual & Reference

Search results

Summary of Contents for GNC 420

Reviews:

Related manuals for GNC 420

Brands by name

Popular brands