Garmin GNC 420 Page 239 Pilot'S Manual & Reference Download

Page: 239 / 258

GNC 420(A) Pilot’s Guide and Reference

SECTION 13 – MESSAGES,

ABBREVIATIONS, & NAV TERMS

13-11

13.3 NAVIGATION TERMS

The following

navigation terms are used on the GNC 420 and in this Pilot’s Guide. Refer to Figures 13-1 and 13-2

for graphic representation of navigation terms.

WPT 1

XTK

NORTH

WPT 2

BRG

DIS

AIRPLANE

DTK

TRK

Figure 13-1 Illustrated NAV Terms

VERTICAL NAVIGATION PROFILE

VERTICAL SPEED REQUIRED

DISTANCE TO TARGET

TIME AND DISTANCE
TO PROFILE

TARGET ALTITUDE
AND POSITION

AIRPORT

CURRENT ALTITUDE
AND POSITION

Figure 13-2 Illustrated Vertical NAV Terms

Term

Description

ALT (altitude)

Height above mean sea level (MSL).

BRG (bearing)

The compass direction from the present position to a destination waypoint.

CAS (calibrated
airspeed)

Indicated airspeed corrected for instrument errors.

CTS (course to steer)

The recommended direction to steer in order to reduce course error or stay on course. Provides
the most efficient heading to get back to the desired course and proceed along the flight plan.

CUM (cumulative)

The total of all legs in a flight plan (cumulative distance).

DIS (distance)

The “great circle” distance from the present position to a destination waypoint.

DOP (dilution of
precision)

A measure of satellite geometry quality on a scale of one to ten (lowest numbers are best,
highest numbers are worst).

DTK (desired track)

The desired course between the active “from” and “to” waypoints.

190-00140-20 Rev. K

Summary of Contents for GNC 420



































































































































































































































































Search results

Summary of Contents for GNC 420

Reviews:

Related manuals for GNC 420

Brands by name

Popular brands

Garmin GNC 420, Pilot'S Manual & Reference

Search results

Summary of Contents for GNC 420

Reviews:

Related manuals for GNC 420

Brands by name

Popular brands