Garmin GNC 420 Page 215 Pilot'S Manual & Reference Download

Page: 215 / 258

GNC 420(A) Pilot’s Guide and Reference

11-25

SECTION 11

ADDITIONAL FEATURES

190-00140-20 Rev. K

The pilot may use the ‘NEXRAD Off?’ and ‘NEXRAD

On?’ fields in the Page Menu (Figure 11-36) to turn off the
display of NEXRAD data from the Map Page.

Figure 11-36 Map Page Options Menu

NOTe: if the GNC 420 is configured for
Weather Data Link interface with a GDL 49 or
GDL 69, pressing the

CLR

Key while viewing

the Map Page reduces the NeXraD density one
incremental step. all NeXraD data is removed
if the

CLR

Key is pressed while density is set to

low.

Request Shortcuts

The pilot can quickly select the NEXRAD, METAR, or

Textual METAR Page for a specific airport from the Airport
Location Page.

Three methods of selecting the Airport Location Page:

• Use the small and large

right

knobs to select the

Airport Location Page from the WPT Group of

pages.

• On the Map Page, move the target pointer to

highlight an on-screen airport. Press the

ENT

Key.

• On any page that displays an airport identifier,

use the cursor and highlight the desired airport

identifier. Press the

ENT

Key.

Once the Airport Location Page is displayed, enter

the identifier for the desired airport. Press the

Key. The options menu appears (Figure 11-37) listing the

following three options:

•  Request NEXRAD?
•  Request METAR?
•  View Text METAR? (if available)

Figure 11-37 Airport Location Page Options Menu

Highlight the desired option and press the

ENT

Key.

‘Request NEXRAD?’ and ‘Request METAR?’ options select
the NEXRAD and METAR Request Pages, respectively.
‘View Text METAR?’ selects the Textual METAR Page for
the desired airport, if textual METAR is available for that

airport.

Summary of Contents for GNC 420



































































































































































































































































Search results

Summary of Contents for GNC 420

Reviews:

Related manuals for GNC 420

Brands by name

Popular brands

Garmin GNC 420, Pilot'S Manual & Reference

Search results

Summary of Contents for GNC 420

Reviews:

Related manuals for GNC 420

Brands by name

Popular brands