manualshive.com logo in svg

Garmin GMX 200, Installation Manual, Page: 8 / 106

Share
Download
Garmin GMX 200 Installation Manual Download Page 8

 

Page vi 

GMX 200 Installation Manual 

Revision D 

190-00607-04 

LIST OF TABLES

 

Table 1-1.  TSO Authorizations ................................................................................................................ 1-5

 

Table 2-1.  Configurations Available........................................................................................................ 2-1

 

Table 2-2.  Accessories Provided Separately ............................................................................................ 2-1

 

Table 2-3.  Options Available ................................................................................................................... 2-1

 

Table 3-1.  Socket Contact Part Numbers................................................................................................. 3-2

 

Table 3-2.  Recommended Crimp Tools ................................................................................................... 3-3

 

Table 3-3.  Backshell Assembly................................................................................................................ 3-4

 

Table 3-4.  Configuration Module Kit – 011-00979-02............................................................................ 3-7

 

Table 3-5.  Configuration Module Wire Color Reference Chart............................................................... 3-7

 

Table 3-6.  Unit Power Loads.................................................................................................................. 3-10

 

Table 5-1.  Preferred RS-232/RS-422 Data Port Configurations (P2001) ................................................ 5-1

 

Table 5-2.  GMX 200 I/O Data Port Configurations (P2002)................................................................... 5-2

 

Table 5-3.  GMX 200 Series Post-Installation Checkout Log................................................................. 5-31

 

Table 6-1.  Troubleshooting Guide ........................................................................................................... 6-1

 

 

 

 

 

Summary of Contents for GMX 200











































































































Reviews:

No comments