manualshive.com logo in svg

Garmin GMX 200, Installation Manual, Page: 75 / 106

Share
Download
Garmin GMX 200 Installation Manual Download Page 75

 

GMX 200 Installation Manual 

Page A-1 

190-00607-04 Revision 

D 

Appendix A  - STC DATA 

A.1    STC/PMA Information 

The STC with Approved Model List (AML), Master Data List (Garmin P/N 005-C0315-00) information 

is available on the Garmin web site at www.garmin.com. Download from the Dealers Only page. 

A.2    Permission to use STC 

Consistent with Order 8110.4C and AC 21-40, Garmin grants permission to Garmin dealers, installers and 

owners of the GMX 200 to use GMX 200 STC No. SA01692SE and the data associated with it, for the 

sole and express purpose of installation and approval of installation of the GMX 200 and associated 

interfaces to other previously approved equipment. 

A.3    Continued Airworthiness Instructions 

Refer to the GMX 200 Instructions for Continued Airworthiness (Garmin P/N 190-00607-00) which

 

is 

available on the Garmin web site at www.garmin.com. Download from the Dealers Only page. 

A.4    STC Approved Model List 

The GMX 200 STC includes an Approved Model List (AML) attached to the STC. The GMX 200 is 

approved for installation on all aircraft listed on the AML following installation instructions and 

limitations described in this GMX 200 Installation Manual. The AML is attached to the STC and may be 

downloaded from the Garmin web site at www.garmin.com. 

Summary of Contents for GMX 200











































































































Reviews:

No comments