Mounting and Connection Considerations
When selecting a location for the remote control receiver and making the wiring connections, observe these
considerations.
• The receiver housing is not weather proof, and the receiver must be installed in a location that is not
exposed to the elements.
• You can connect a single receiver to up to 8 LED speakers (4 pair). You must use an additional receiver (sold
separately) to connect to additional LED speakers.
• You can pair a remote control with up to three receivers.
Connecting the Remote Control Receiver
You can connect up to 8 (4 pair) of RGB LED speakers to one remote control receiver.
1 Route a power wire (not included) from a 12 Vdc power source to the location of the receiver .
2 Install the included 7.5 A fuse on the power wire.
3 Route 4-conductor wire
(not included) from the receiver to the speakers you want to control, joining the
wire where needed to connect up to 8 speakers.
4 Connect the 4-conductor wire to the RGB connectors on the speakers according to the installation
instructions provided with the speakers.
5 Loosen the wire terminal screws on the bottom of the receiver using a 3 mm flat screwdriver.
6 Connect the power and RGB speaker wires to the wire terminals on the sides of the receiver.
Letter on receiver label
Wire color or function
V+ (left side)
12 Vdc positive (+)
V- (left side)
12 Vdc negative (-)
BLUE
RGB blue wire
GREEN
RGB green wire
RED
RGB red wire
V+ (right side)
RGB 12 Vdc positive (+) (common) wire
7 Tighten the wire terminal screws on the bottom of the receiver.
8 Secure the receiver to the mounting location using cable ties or adhesive (not included).
2
Wireless RGB LED Remote Control Instructions
