Garmin FUSION MS-RA210, Owner'S Manual

Page: 24 / 32

Adjusting Additional Audio Settings for a Zone
1 Select > SETTINGS .
2 Select ZONE .
3 Select a zone.
4 Select one or more options:
• To limit the maximum volume output of this zone, select
VOLUME LIMIT , and adjust the level.
• To adjust the right and left speaker balance of this zone, select BALANCE , and adjust the balance.
Power Options
Select > SETTINGS > POWER OPTIONS .
POWER SAVE : Disables the LCD backlight after one minute of inactivity to save battery power.
Source Settings
Select > SETTINGS > SOURCE , and select the name of the source you want to configure.
NOTE: This menu contains system-wide source settings. Most sources also have source-specific settings. See
the sections of this manual for each source for more information about source-specific settings.
Not all options are available for every source on the stereo.
SOURCE ENABLED : Enables and disables the source on this stereo. You may want to disable sources that
will never be used on the stereo so they no longer appear on the source-selection screen.
SOURCE NAME : Changes the name of the source as it appears on this stereo.
Update Options
Select > SETTINGS > UPDATE .
NOTICE
Do not turn off the device or disconnect the power during a software update. Turning off the power during a
software update may cause the device to become unresponsive.
NOTE:
• You can update the device software using a USB flash drive ( Updating the Software Using a USB Flash
Drive , page 23 ).
• The device may restart a few times when updating. This is normal.
• You can program only newer versions of software on the device.
STEREO : Updates the stereo using a valid software update file on a connected USB flash drive ( Updating the
Software Using a USB Flash Drive , page 23 ).
NRX REMOTE : Updates an optional NRX remote connected to the NMEA 2000 port or NMEA 2000 ® network.
DAB MODULE : Updates an optional DAB module connected to the SIRIUS XM port.
FACTORY RESET : Restores all settings to the factory default values.
20 General Settings