FUSION-Link
™
Network Technology
FUSION-Link network technology allows you to fully control compatible Fusion entertainment systems on
compatible multi-function displays installed at the helm, flybridge, or navigation station of the vessel. This
provides integrated entertainment control and a less cluttered console.
The partnered multi-function display becomes the portal on which you can control all audio on the vessel, no
matter where on the vessel the connected stereo is installed. The FUSION-Link equipped stereo can be
installed out of sight if space is an issue and users need to access the stereo only to replace removable media.
FUSION-Link technology on this device can communicate using existing industry-standard network connections
including Ethernet and Wi
‑
Fi wireless technology.
FUSION-Link technology offered on this device can communicate using existing industry-standard NMEA 2000
networks.
NMEA 2000 Remote Control and Display
The stereo can be controlled by compatible Fusion wired remote controls installed in the audio zones
throughout the vessel. Operating the entertainment system from the remote control is similar to operating it
from the main stereo.
Fusion wired remote controls operate over an existing NMEA 2000 network, so wiring the remote controls
directly to the stereo is not necessary. All remote controls connected to the same NMEA 2000 network as the
stereo can control the stereo.
If your vessel does not have a NMEA 2000 network, you can directly connect a single Fusion remote control or
create a Fusion remote control network to connect multiple Fusion wired remote controls directly to the NMEA
2000 connector on the stereo. See the installation instructions provided with your stereo and remote for more
information.
You can directly connect a single Fusion remote control or create a Fusion remote control network to connect
multiple Fusion wired remote controls directly to the NMEA 2000 connector on the stereo. See the installation
instructions provided with your stereo and remote for more information.
The Fusion wired remote control can also serve as an NMEA
®
display showing NMEA navigation data or vessel
performance data from other NMEA devices on an existing NMEA 2000 network. See the instructions provided
with your remote control for information on supported NMEA 2000 PGN information.
Configuring an Optional Wired NRX Remote Control
NOTICE
The stereo is configured by default to work with a NMEA 2000 network, and the NRX POWER option should be
enabled only when an optional wired NRX remote control is connected directly to the stereo. Enabling this
option when the stereo is connected to a NMEA 2000 network may damage other devices on the NMEA 2000
network.
If you connect an optional wired NRX remote control directly to the stereo, and not through a NMEA 2000
network, additional configuration is needed.
1
Select
>
SETTINGS
>
POWER OPTIONS
.
2
Select an option:
• If you connected both your stereo and your optional wired remote to a NMEA 2000 network, make sure
the
NRX POWER
option is not selected. This enables the optional remote to receive power from the
NMEA 2000 network.
• If you connected the optional wired remote directly to the stereo through the NMEA 2000 connector,
select the
NRX POWER
option. This enables the stereo to supply power to the optional remote.
32
Additional Stereo Control Options
Summary of Contents for Fusion Apollo MS-RA770
Page 1: ...FUSION Apollo MS RA770 O W N E R S M A N U A L ENGLISH...
Page 6: ......
