manualshive.com logo in svg

Garmin Fishfinder 160 Blue, Owner'S Manual

The Garmin Fishfinder 160 Blue is a top-notch fishing tool that provides accurate readings and superior performance. Ensure you make the most of this device by downloading the free Owner's Manual from manualshive.com. Obtain all the necessary information you need to fully maximize the benefits of this remarkable fishfinder.

Share
Download
background image

7

Installation

Installing the Display

Display Installation (Surface Mount)

The Fishfi nder 160 Blue can be mounted to a fl at surface using the 

supplied Surface Mount Bracket.

Surface Mounting the Display:

1. Position the Surface Mount Bracket in the desired location. Leave 

approximately 2” behind the unit for cable clearance.

2. Mark the location of the four mounting holes with a pencil.

3. Drill pilot holes for the mounting fasteners (not included in kit). 

4. Secure the Surface Mount Bracket using the mounting fasteners.  

5. Slip the unit into the Surface Mount Bracket.

6. Tighten the knobs to secure the unit to the bracket.

The Surface Mount Bracket is designed to be secured using a fl at head screw.  
If you use a screw with a countersunk head, you risk damaging the Surface 
Mount Bracket.

OK

Mounting Bracket

Surface Mount 

Bracket

FF 160 B Rev B.indd

12/13/01, 2:49 PM

7

www.reelschematic.com

www.reelschematic.com

Summary of Contents for Fishfinder 160 Blue



















































Reviews:

No comments

Related manuals for Fishfinder 160 Blue

Standard Horizon FF525 Installation Manual preview
FF525
Brand: Standard Horizon Pages: 18
Navman FISH 450 Tricolor Installation And Operation Manual preview
FISH 450 Tricolor
Brand: Navman Pages: 107
Si-tex HE-705 Installation & Operation Manual preview
HE-705
Brand: Si-tex Pages: 24
Si-tex Pro Fish III Owner'S Handbook Manual preview
Pro Fish III
Brand: Si-tex Pages: 32
Si-tex SVS-1010 Operation Manual preview
SVS-1010
Brand: Si-tex Pages: 122
Raymarine E70085 Dragonfly Operation Manual preview
E70085 Dragonfly
Brand: Raymarine Pages: 96

Brands by name

Popular brands

Load more brands