manualshive.com logo in svg

Garmin Fishfinder 160 Blue, Owner'S Manual

The Garmin Fishfinder 160 Blue is a top-notch fishing tool that provides accurate readings and superior performance. Ensure you make the most of this device by downloading the free Owner's Manual from manualshive.com. Obtain all the necessary information you need to fully maximize the benefits of this remarkable fishfinder.

Share
Download
background image

On the Water

36

Appendix A

Specifi cations

Physical

Case: Fully gasketed, high-impact plastic alloy

Display: 3.3” x 3.3” (8.3 x 8.3 cm), 4.6” diagonal (11.7 cm), 

160 H x 160 W pixels, FSTN LCD with incandescent backlighting

Size: 4.93” H x 6.3” W x 3.0” D (12.5 x 16 x 7.6 cm)

Weight: 22 oz.

Temperature Range: +5° to 158°F (-15°C to 70°C)

Waterproof: IEC 529, level IPX-7 (submerged to 1 meter for 30 minutes)

Power

Input: 10 to 18 VDC with High Voltage Protection

Usage: 12 watts maximum

Nominal: 12 VDC @ 0.8 amps

Performance

Sonar Power Output: 500 watts (RMS), 4000 watts (peak to peak)

Frequency: 200/50 kHz (10°/40°)

Depth 1500 foot max depth*

NMEA

Support: NMEA 0183 Versions 2.0 - 2.3

Output Sentences: DBT, DPT, NTW, VHW

*  Depth capability is dependent on water salinity, bottom type and other water 

conditions.

Specifi cations subject to change without notice.

FF 160 B Rev B.indd

12/13/01, 2:50 PM

36

www.reelschematic.com

www.reelschematic.com

Summary of Contents for Fishfinder 160 Blue



















































Reviews:

No comments

Related manuals for Fishfinder 160 Blue

Eagle Fish I.D. II Installation And Operation Instructions Manual preview
Fish I.D. II
Brand: Eagle Pages: 16

Brands by name

Popular brands

Load more brands