Garmin ECHOMAP ULTRA 2 Owner'S Manual Download

Page: 8 / 164

Mercury® Engine Gauges...................103
Setting the Fuel Alarm........................ 104

Actual Vessel Fuel...........................104

Viewing the Wind Gauges...................104

Gauge............................................... 104
Configuring the Speed Source........104
Configuring the Heading Source of the

Wind Gauge..................................... 105
Customizing the Close-Hauled Wind

Gauge............................................... 105

Viewing Trip Gauges........................... 105

Resetting Trip Gauges.................... 105

Viewing Graphs................................... 105

Setting the Graph Range and Time

Scales.............................................. 106
Disabling Graph Filtering................ 106

inReach® Messages..................... 106

Connecting an inReach Device to the

Chartplotter......................................... 106
Receiving Messages........................... 107
Replying to a Message....................... 107
Sending a Preset or Check-In

Message.............................................. 107
Starting a New Conversation............. 107
Sending a Quick Message.................. 107
Sending a Custom Message.............. 108
inReach SOS Calls............................... 108

Sending an inReach SOS Call......... 108
Communicating with the Garmin

Response Team During an SOS

Call................................................... 108
Cancelling an inReach SOS Call..... 109

Digital Switching...........................109

Adding and Editing a Digital Switching

Page..................................................... 109

Controlling Third-Party Equipment

Installed on Your Boat.................. 109

Power-Pole® Anchor System............. 109

Enabling the Power-Pole Anchor or

CHARGE™ Overlay........................... 109
Setting Up the Power-Pole Anchor. 110
Power-Pole Overlay......................... 110

Power-Pole Advanced Boat

Control............................................. 111
CHARGE Overlay............................. 111

Mercury Troll Control Features.......... 112

Adding the Mercury Troll Control

Overlay............................................. 112
Mercury Troll Overlay...................... 113

Mercury Cruise Control....................... 113

Enabling the Mercury Cruise Control

Overlay............................................. 113
Mercury Cruise Control Overlay..... 114

Mercury Engine Details....................... 114

Adding the Mercury Engine

Overlay............................................. 114
Mercury Engine Overlay.................. 115
Enabling the Mercury Engine Sport

Exhaust Setting............................... 115

Mercury Active Trim Control.............. 115

Adding the Mercury Active Trim

Overlay............................................. 115
Mercury Active Trim Overlay.......... 116

Dometic® Optimus® Features.......... 116

Activating the Optimus Overlay

Bar.................................................... 116
Optimus Overlay Bar Overview....... 117
Optimus Overlay Symbols.............. 117
Optimus Limp Home Mode............ 117

Tide, Current, and Celestial

Information.................................. 118

Tide Station Information.....................118
Current Station Information............... 118
Tide and Current Overlays.................. 119

Adding Tide and Current Overlays. 119

Celestial Information.......................... 119
Viewing Tide Station, Current Station, or

Celestial Information for a Different

Date...................................................... 120
Viewing Information for a Different Tide

or Current Station................................ 120
Viewing Almanac Information from the

Navigation Chart................................. 120

Warning Manager......................... 120

Viewing Messages.............................. 120
Sorting and Filtering Messages......... 120
Saving Messages to a Memory Card. 120
Clearing All of the Messages............. 120

Table of Contents

Summary of Contents for ECHOMAP ULTRA 2





































































































































































Search results

Summary of Contents for ECHOMAP ULTRA 2

Reviews:

Related manuals for ECHOMAP ULTRA 2

Brands by name

Popular brands

Garmin ECHOMAP ULTRA 2, Owner'S Manual

Search results

Summary of Contents for ECHOMAP ULTRA 2

Reviews:

Related manuals for ECHOMAP ULTRA 2

Brands by name

Popular brands