Garmin Cirrus Perspective SR22T, Reference Manual

Page: 71 / 192

Cirrus Perspective ™ by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-09 Rev. A
53
Procedures
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
Activate Arrival using the cursor:
1) Press the FPL Key on the PFD/MFD Control Unit to display the active flight
plan.
2) Press the FMS Knob to activate the cursor.
3)
Turn the large
FMS
Knob to highlight the TO waypoint of the desired leg
within the arrival.
4)
Press the
ACT LEG
Softkey. A confirmation window showing the selected
leg is displayed.
5)
With ‘ACTIVATE’ highlighted, press the
ENT
Key.
LOAD AND/OR ACTIVATE AN APPROACH PROCEDURE
NOTE: If certain GPS parameters (SBAS, RAIM, etc.) are not available, some
published approach procedures for the desired airport may not be displayed
in the list of available approaches.
1) Press the PROC Key.
2)
Turn the large
FMS
Knob to highlight ‘SELECT APPROACH’.
3)
Press the
ENT
Key. A list of available approaches for the destination airport
is displayed.
4)
Turn either
FMS
Knob to highlight the desired approach.
5)
Press the ENT Key. A list of available transitions for the selected approach
procedure is now displayed.
6)
Turn either FMS Knob to select the desired transition. The “Vectors”
option assumes vectors will be received to the final course segment of
the approach and will provide navigation guidance relative to the final
approach course.
7)
Press the
ENT
Key. The cursor moves to the MINIMUMS field.
8)
If desired, the DA/MDA for the selected approach procedure may be
entered and displayed on the PFD. Turn the small
FMS
Knob
in the
direction of the green arrow to change the display from OFF to BARO.
9) Press the
ENT
Key. The cursor moves to the altitude field. Turn the small
FMS Knob
to enter the published DA/MDA for the selected approach
procedure.
10) Press the ENT Key. ‘LOAD? or ACTIVATE?’ is now displayed with ‘LOAD?’
highlighted.