______________________________________________________________________________
____________________________________________________________________________
Page 8-6
LMM for the Kodiak 100
190-02102-00 Rev.4
a) Up pitch minimum allowed torque is 97.026 in-lbs and maximum is 115.360 in-
lbs.
b) Down pitch minimum allowed torque is 97.026 in-lbs and maximum is 115.630
in-lbs.
c) Roll left minimum allowed torque is 57.462 in-lbs and maximum is 68.320 in-
lbs.
d) Roll right minimum allowed torque is 57.462 in-lbs and maximum is 68.320 in-
lbs.
e) Yaw left minimum allowed torque is 97.026 in-lbs and maximum is 115.630 in-
lbs.
f) Yaw right minimum allowed torque is 97.026 in-lbs and maximum is 115.630
in-lbs.
g) Up pitch trim minimum allowed torque is 57.462 in-lbs and maximum is
68.320 in-lbs.
h) Down pitch trim minimum allowed torque is 57.462 in-lbs and maximum is
68.320 in-lbs.
17. The following prompts may be displayed indicating an abnormality during the
test. Use the following guidelines to troubleshoot.
Table 8-1. Troubleshooting Table
Message Prompt
Probable Cause
Action
STOP NOT REACHED
The servo did not detect
a torque value which
exceeded 70% of the
established mechanical
torque limit within 1
minute of starting the
test.
A low slip clutch setting
is the likely cause.
• Repeat the test.
• If the same result is
received, remove the
servo gearbox and check/
set the clutch on the
stand.
Uncontrolled if Printed
Summary of Contents for Cessna Caravan G1000
Page 2: ...BLANK PAGE Uncontrolled if Printed...
Page 288: ...Uncontrolled if Printed...
