INSTALLATION/OPERATION & SERVICE MANUAL - 1&2 PLATEN
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
PART #4527466 (12 Aug 2011)
Page 60
TO UPDATE CONTROL SOFTWARE (motor control)
(continued)
2. Attach RJ12 - 6 conductor Modular Tele-
phone Cable to ZipGrader & Motor Speed-
Control (MSC) board.
a. Attach Cable to the ZipGrader
b. Attach opposite end fo cable to Motor
Speed Board Adapter Kit.
c. Remove 4-pin Riacom Connector COMM
CABLE from Motor Speed Control board
and connect ZipGrader to msb.
3. Begin uploading soft ware by :
a. Turn Grill main power switch ON.
Note: Control will alternately fl ash ERROR
COMMS.
b. Press the ZipGrader BLUE button.
c. Turn grill power off via the main power
switch and wait for LED lights on the Mo-
tor Speed Control Board to turn com-
pletely off .
d. Turn grill power back on via the main
power switch.
e. Progress LED’s on ZipGrader should begin
as indicated on rear of ZipGrader.
4. Allow ZipGrader to turn off automatically.
5. Turn Main Power Switch to OFF position.
6. Remove 4-pin Riacom connector from Zip-
Grader, and replace with 4-pin Riacom con-
nector COMM Cable previously removed.
7. Repeat steps 3 to 6 to others MSC
8. Carefully replace bottom kick panel, and
control panel can return unit to service :
a. Turn main power switch ON.
b. Press POWER ON button on main control.
c. Platens will automatically come down
and into PREHEAT MODE.
d. Switch controls to desired time of day by
pressing AM/PM button.
e. Allow unit to reach set temperature and
autocalibrate.
f. Verify proper beef integrity and adjust
cook times as needed in Manual Mode.
Summary of Contents for MWE2W
Page 2: ......
