Part # 4517125 Rev. 3 (18 May 16)
Page 26
PROGRAMMING
continued
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press two, (2) times. “PROGRAMMING MODE SYSTEM
SETUP” is displayed.
5. Press eleven, (11) times. “CONTROL TYPE ELECTRIC (or
GAS)” is displayed. (type varies by grill).
6. Use and
to change Control Type to match the
design of the grill.
7. Press to save the changes.
8. Press to return to “PROGRAMMING MODE MENU
ITEMS”
9. Press again to exit.
To Turn Extended Time On/Off :
1. Press and hold
for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press two, (2) times. “PROGRAMMING MODE SYSTEM
SETUP” is displayed.
5. Press twelve, (12) times. “EXTENDED TIME NO (or YES)”
is displayed.
6. Use and
to turn Extended Time on or off .
7. Press to save the changes.
8. Press to return to “PROGRAMMING MODE MENU
ITEMS”
9. Press again to exit.
To Change the Grill Function:
1. Press and hold
for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press two, (2) times. “PROGRAMMING MODE SYSTEM
SETUP” is displayed.
5. Press thirteen, (13) times. “FUNCTION CLAMSHELL (or
FLAT)” is displayed.
6. Use and
to toggle between Flat mode and
Clamshell mode.
7. Press to save the changes.
8. Press to return to “PROGRAMMING MODE MENU
ITEMS”
9. Press again to exit.
To Change the Start Delay:
1. Press and hold
for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press two, (2) times. “PROGRAMMING MODE SYSTEM
SETUP” is displayed.
5. Press fourteen, (14) times. “START DELAY YES (or NO)” is
displayed.
6. Use and
to turn Start Delay on or off .
7. If Start Delay is On (YES), press
to display “DELAY TIME
XX:XX”.
8. Use and
to set the Delay Time to the desired value.
9. Press to save the changes.
10. Press
to return to “PROGRAMMING MODE MENU
ITEMS”
11. Press
again to exit.
To Change the Alarm Mode:
1. Press and hold
for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press two, (2) times. “PROGRAMMING MODE SYSTEM
SETUP” is displayed.
5. Press fi fteen, (15) times. “ALARM MODE AUTO (or
MANUAL)” is displayed.
6. Use and
to change the Alarm Mode to either Auto
or Manual.
7. Press to save the changes.