Figure 13: Show Speed setting of the selected module
Page 8
Page 8
V
Veerr 1
1..
6
Pressing
when on the Slot 1 Status Screen of a Copper TAP Module,
will bring up this screen.
=========================
Slot 1 Speed Mode Configuration
=========================
Current Speed: 1G
New Speed: 1G
1. 1G
2. 100M
0. Return and Apply
Figure 14: This screen lets you control LFP ON or OFF
Pressing
when on the Slot 1 Status Screen of a Copper TAP Module, will bring
up this screen.
====================
Slot 1 LFP Configuration
====================
Current LFP state: ON
New LFP state: ON
1. ON
2. OFF
0. Return and Apply
LFP is used mostly for HA designed networks. When turned on, it can sense a network failure
and reflect the failure to the adjacent port of the live network allowing the network
s failover
mechanism to switch over to the secondary network path.
M1G2ACE/M1G2DCE
M1G1ACE/M1G1DCE
M1G2ACE/M1G2DCE
M1G1ACE/M1G1DCE
