Dimensions and Technical Specifications
RTCSmp Built-In Temperature Controlled Hold-Line
Part # 4532287 Rev 2 (1/20/14)
7
3
Dimensions and Technical Specifications
3.1
Rating Plate
The rating plate specifies important information such as model number,
serial number, and electrical specifications. The rating plate is affixed to
the bottom of the generator, by the connectors at the front.
3.2
Nomenclature and Models
Series
Built-In Power (Watt)
Voltage* (Volt) Model
HO
= Hold Line
IN
800
(1 heat-retaining plate)
208
HOIN800-208
1600
(2 heat-retaining plates)
HOIN1600-208
2400
(3 heat-retaining plates)
HOIN2400-208
3200
(4 heat-retaining plates)
HOIN3200-208
* For the 230V-option, please consult your dealer for the availability in your region.
3.3
Dimensions
Component
Dimensions
Generator Housing
11.93” x 12.28” x 5.31” (303 x 312 x 135 mm)
Heat Retaining Plate
20.47” x 12.60” x 2.95” (520 x 320 x 75 mm)
Ceran Glass
20.47” x 12.60” x 0.16” (520 x 320 x 4 mm)
3.4
Electrical Specifications
Model
Voltage
Power
Power Per Heating Plate
HOIN800/1600/2400/3200 208 V AC / 1Ph
3200 W / 17A
800W
HOIN800/1600/2400/3200 230 V AC / 1Ph
3200 W / 15A
800W
3.5
Operating Conditions
Max. Tolerance of Nominal Supply Voltage
+6 /-10 %
Supply frequency
50/60 Hz
Ingress Protection class
IP X0
Minimal Diameter of Induction Pan
5” (12cm)
Maximum Ambient Temperature
In Storage > -4°F to +158°F (-20°C to +70°C)
In Operation >+ 41°F to +104°F (+5°C to +40°C)
Maximum Relative Air Humidity
In Storage > 10% to 90%
In Operation > 30% to 90%
Set Temperature Range
122-212°F / 50-100°C
Maximum air flow: 56.50cfm / 96m
3
per hour and min. opening: 9.30 sq.in. / 6000mm
2
is required.
3.6
Compliances
•
North American models
:
ETL listed in compliance with UL 197, CSA C22.2 No.109, NSF-4. Complies with FCC part 18, ICES-001
•
CE models
comply with the latest European Norms:
EN 60335-1, EN 60335-2-36, EN 62233 (EMC/EMV)