Page 29 | HEEGM Service Manual part# 4532502 (Rev 0)
6 COMPONENTS
(CONT.)
To replace a solenoid valve connected to the
OUTER
SIDE manifold
1.
DANGER: Turn off gas supply and remove main power supply to the unit.
2. Remove the Left Side Leg Panel, Knobs and Valve Panel (see sections 6.1, 6.2, and 6.3).
3. Loosen the connection to the inlet box.
4. Remove the screw to release the solenoid bracket.
5. If necessary, release tension by loosening the screws on each side of the inlet box.
6. It is easier to remove the Outer Solenoid/Manifold Assembly after removing the front gas tube
connected to the INNER SIDE manifold.
Remove the front gas tube by loosening the connectors at both ends.
tip
Use double-wrenching method to prevent the bottom fitting from moving while
turning the top fitting. Use 15/16 & 11/16 combination for 90 deg fitting, and 15/16 & 13/16
combination for straight fitting.
7. OUTER SIDE manifold: loosen the adapter connecting to elbow as shown.
tip
Use double-wrenching method (15/16 & 13/16).
8. Disconnect wires. Tilt the manifold/solenoid assembly and remove from the leg compartment.
i
Ensure you mark the wires and have a copy of the wiring diagram for reference.
9.
i
Replace the
solenoid
in the
CORRECT
direction
and reassemble.
10.
WARNING: Check for gas leak.
11.
i
To avoid pinching the wires, tuck the wires safely away before sliding back the Leg Panel.
7
6
6
3
4
5
Summary of Contents for HEEGM24CL
