Page 27 | HEEGM Service Manual part# 4532502 (Rev 0)
6 COMPONENTS
(CONT.)
FOR A 24” OR 36” UNIT — To replace a solenoid valve:
A 24” or 36” unit has only ONE side manifold in the LEFT LEG and ONE Front Manifold.
1.
DANGER: Turn off gas supply and remove main power supply to the unit.
2. Remove the Left Side Leg Panel, Knobs and Valve Panel (see sections 6.1, 6.2, and 6.3).
3. Loosen the adapter connecting to the front manifold elbow.
tip
Use double-wrenching (15/16 and 13/16) method to prevent the bottom fitting from
moving while turning the top fitting.
4. Loosen the connector at the inlet box at the back.
5. Remove the screw to release the solenoid bracket.
6. Disconnect wires and remove the solenoid valves and side manifold assembly.
i
Ensure you mark the wires and have a copy of the wiring diagram for reference.
7.
i
Replace the
solenoid
in the
CORRECT
direction
and reassemble.
8.
WARNING: Check for gas leak.
9.
i
To avoid pinching the wires, tuck the wires safely away before sliding back the Leg Panel.
3
3
4
5
Summary of Contents for HEEGM24CL
