SERVICE MANUAL
GARLAND ELECTIC CLAMSHELL BROILER, CXBE12 MODEL
Part #4532096 Rev 1 (26 June 2013)
Page 10
STEPS TO REMOVE CLAMSHELL BROILER FROM WOOD CRATE
CAUTION
Heavy load
Use of lifting aids
and proper lifting
technique required
The unit is very heavy (500Lbs) so some form of
mechanical assistance may be required to lift and
position the broiler.
STOP!
- FOLLOW THE INSTRUCTIONS BELOW TO SAFELY AND EASILY REMOVE UNIT FROM PACKAGING SKID
2. REMOVE AND DISCARD TWO (2) #10-24 X 2 1/2”
LONG TRUSS HEAD PHILLIPS DRIVE MACHINE
SCREWS AND FLAT WASHERS FROM THE LOWER
SUPPORT BRACE (“ITEM B” ) ON EACH SIDE OF
UNIT.
3. PUSH UNIT FORWARD OFF OF THE SKID. THE
LOWER SIDE SUPPORT BRACES WILL SERVE AS
GUIDES AND ENSURE THAT THE UNIT ROLLS
STRAIGHT AS IT IS BEING MOVED.
4. REPLACE THE FASTENERS REMOVED FROM EACH
SIDE OF THE UNIT IN STEP 2 WITH TWO (2) #10-24
X ½” LONG PAN HEAD PHILLIPS DRIVE MACHINE
SCREWS INCLUDED WITH UNIT ACCESSORIES.
Tools required.
1. REMOVE AND DISCARD FRONT STOP BOARD
(ITEM “A”) NAILED TO FRONT OF SKID.
