background image

 

Français

 

English

58/184

Who has signed below, Juan Palacios , authorised by  Productos McLand S.L., with the following 
address C/ La Fragua 22, 28933, Móstoles, España , declares that the products brand  Garland models  
Apache 675 SL-V20 with serial number  of year 2018 on (the year of manufacture is clearly indicated 
on the tool identification plate, followed the serial number) and whose function is  “machine with 
grass-cutting attachment(s) where the cutting device operates in a plane approximately parallel to the 
ground and which uses the ground to determine the height of cut by means of wheels, air cushion or 
skids, etc., and which utilises an engine or an electric motor for a power source. The cutting devices 
are either rigid cutting elements”, comply with all the requirements stated by the  Directive 2006/42/EC 
of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 
95/16/EC  

These tools also comply with the requirements of the following community directives: 

• 

DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 
2014 on the harmonisation of the laws of the Member States relating to electromagnetic 
compatibility (recast) 

• 

Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on 
the approximation of the laws of the Member States relating to the noise emission in the 
environment by equipment for use outdoors  

• 

Commission Directive 2010/26/EU of 31 March 2010 amending Directive 97/68/EC of the 
European Parliament and of the Council on the approximation of the laws of the Member States 
relating to measures against the emission of gaseous and particulate pollutants from internal 
combustion engines to be installed in non-road mobile machinery 

• 

Harmonized Standard:  EN ISO 5395-1:2013+A1:2018; EN ISO 
5395-2:2013+A1:2016+A2:2017 

 
Power (kW)  = 2,8/2.800 
A-weighted sound power level LwA (dB(A)) 0 = 94,2 
Guaranteed sound power level dB(A) = 96 

 DECLARATION OF CONFORMITY (CE)

Juan Palacios

Product Manager

Móstoles 24/9/2020  

Summary of Contents for APACHE 675 SL
































Reviews: