background image

Română

34/184

use this machine barefoot or with sandals or open-
toed shoes.

Use eye and hearing protection

Use this machine wearing long pants.

The use of additional safety clothing and security 
measures will reduce the risk of personal injury.

You should always have the following with you:
• Tools.
•  Signal tape for the work area.
•  Mobile phone (For use in the case of emergency).

2.2.2. VIBRATIONS

The prolonged use of the machine, exposes the 
client to vibrations that in extreme cases and through 
many hours of use of the machine could cause the 
¨white finger syndrome¨ also known as Raynaud 
phenomenon. This causes a reduction in the tact of 
the fingers and their capacity to regulate temperature 
generating a lack of sensibility. This sickness could 
in extreme cases cause problems with the nerve 
endings.
The exposure to the vibrations is the cause of 
the white finger syndrome. To minimise this 
effect as much as possible, follow the following 
recommendations:

- Always use gloves
- Always have your hands warm
- Take frequent breaks
- Always hold the machine tightly by the handles

If you detect any of the symptoms of the white finger 
syndrome, consult immediately with your doctor.

2.3. SAFETY IN THE WORK AREA

Do not operate this machine in explosive 
atmospheres as well as in the presence of 
flammable liquids, gases and dust.

Do not start the machine in a room or 
enclosure. The exhaust fumes and fuel 
fumes contain carbon monoxide and 

harmful chemicals. In case of a concentration of 
gases produced by poor ventilation, remove all that 
impedes the flow of clean air from the work area to 
improve ventilation and do not return to work in the 
area unless you have correctly ventilated the area 
and are certain that ventilation is sufficient as to not 
happen again this concentration.

The area within a radius of 15 meters 
around the machine should be 
considered risk area in which no one 

must enter while the machine is running (Security 
Area). When necessary, use ropes and warning signs 
to mark the Security Area.

Maintain children and curious persons away from the 
work area while operating this machine. Distractions 
can cause a loss of control. Make sure that children, 
people or animals do not come into your work area
When the work must be performed simultaneously 
by two or more persons, always check the presence 
and location of others in order to maintain a sufficient 
distance between each person to ensure safety.

Summary of Contents for APACHE 675 SL
































Reviews: