UP FOLDING WALL MOUNT
8
WOOD PAD WALL ATTACHMENT
When attaching the wood pads to the wall, it is important to place the anchors in a location that will
not reduce the strength of the wood. Anchors should be ½” diameter and the holes in the wood pads
should be no larger than 9/16” in diameter. The centerline of the holes should not be closer than 2”
from the edge or end of the wood pads.
Refer to the illustration below for the recommended locations of the anchors on the wood pads.
Upper chain mount and cable pulley wood pads are shown in the illustration below. The lower two
wood pads (i.e. frame mounting pads) will have two anchors on each end as shown in the illustration
and only one anchor located directly in the center of the wood pad.
