UP FOLDING WALL MOUNT
11
Install the cross bracing on the lower extension arms. Refer to the illustration below for the correct
attachment method.
Note the 3/8 x 2”, 3/8 x 1-1/4” carriage bolts, and the 3/8” whiz-lock nuts are supplied with item 16
and are not listed in the parts list. DO NOT fully tighten these clamp bolts at this time as it may be
necessary to reposition them after the board and goal are installed and the FOB is set.
Install the #5 pulley onto the center
bracket of the top wood pad using the
5/16” quick link. Make certain link is
fully closed and tightened.
Install equal length of chain on each
side using a 5/16” quick link to connect
the chain to the chain anchors. Make
sure link is fully closed and tightened.
FOR UNITS WITHOUT HEIGHT ADJUSTER CONTINUE TO PAGE 12
FOR UNITS WITH HEIGHT ADJUSTER PROCEED TO PAGE 14
