Page
30
User Manual
GARDTEC
800 Series
8)
Press NO until the Grp you wish to control is
displayed.
(For example Grp1)
. Then Press YES.
Note:
If a Code level other than Control has been
chosen the selected Output Group will be
activated each time the code is used. The
use of the code will be as normal for that level
of code.
If a Code level of Control has been selected the
Output Group will be activated each time the code
is entered (or G-Tag presented) and is normally used
in conjunction with a Magnetic Lock for limited
Door Entry capability and may be given an extra
attribute of Can or Can’t Unset. A Control Level of
Code can never Set the system.
9)
If you have chosen a Control level of code
the display will show:-
(If you are using another level of code and this
screen is not displayed go to step 12)
Or
10)
Press NO until the required setting is displayed
then Press YES. If Can Unset was chosen
the display will show:-
(If Can’t Unset was chosen, this screen is not
displayed, jump to step 12)
11)
Use the keys 1 - 7 or 0 for C (Cleaner) to toggle
the Area/s you wish to control with this code.
When finished press YES.
Control Code
Can Unset ok ?
Control Code
Can’t Unset ok ?
Assigned Area/s
= 1234567C ok?
PR5893 8.qxd 22/05/2006 11:14 Page 30
