background image

 

Gardner Denver 

1800 Gardner Expressway 

 Quincy, IL 62301 

Ph: 217-222-5400 

 Fx: 217-223-5897

 

Statement of Limited Warranty

 

 

Gardner Denver, Inc, as a designer and fabricator of compressed air management systems and controls, 
guarantees our equipment to be free of defects in design and workmanship for a period of one year from 
start up or eighteen months from the date of release for shipment.  All equipment included on any system, 
manufactured by others, and included  as  an  integral  part  of  the  system, will be subject to the terms and 
conditions of any warranty or agreement of the original equipment manufacturer (OEM).  

Any liability for 

consequential and incidental damage is expressly disclaimed.  There is no implied warranty of 
merchantability nor any other warranty which extends beyond the description on the face hereof. 

 
Defects in design or workmanship are subject to the following conditions: 
 

Design 

 
If Gardner Denver is given the full design responsibility, including equipment selection and 
component interaction circuits, and design, then Gardner Denver will fully guarantee the 
equipment to be sound and to perform in the specified and proposed manner.  Gardner 
Denver does not warrant design details nor specific components requested by the customer 
and incorporated on the final design.  Any OEM equipment, that does not perform to 
published specifications, will be the responsibility of the OEM. 
 

Workmanship 

 
Gardner Denver guarantees our workmanship to be equal to the standard of custom and 
usage for the application.  Any failure as a result of substandard workmanship on the part of 
Gardner Denver, excluding OEM equipment; will be considered the responsibility of 
Gardner Denver International Inc. 

 
The evaluation and disposition of all claims of warranty will be the sole responsibility of Gardner Denver, 
and our decision is final.  Repair or replacement will be at the option of Gardner Denver.  Gardner Denver 
will have no responsibility for any repair unless first given notice and a reasonable opportunity for Gardner 
Denver to make the repair.  No returned parts will be accepted, nor will any warranty consideration 
commence unless a bona fide purchase order from a responsible party is obtained by Gardner Denver to 
cover any expenses not considered by Gardner Denver to be part of this warranty.  Labor associated with 
the repair or replacement of parts considered under the above conditions to be covered under this warranty 
will be provided at no cost to the owner. 

Summary of Contents for XMX Series



































Reviews: