background image

SECTION 1: SAFETY INFORMATION

1.10  To Prevent Injury...
1.11  Never operate this product if it has a damaged cord or plug.  If it is not working properly, has    
 

been dropped, damaged or has fallen into water, please contact a Gardner Denver Welch  

 

 

service center to arrange return for examination and repair.

1.12    Keep the cord away from heated surfaces. All electrical products generate heat. To avoid seri-   
 

ous burns never touch unit during or immediately after operation.

1.13  Never block any pump case ventilation openings  or place it on a surface where the ventilation   
 

openings may be blocked.  

 

The air openings are for ventilation of the motor inside the housing.  Keep all air openings free   

 

of lint,  dirt and other foreign objects.

1.14  Always disconnect power source before servicing.

1.15  Never insert fi ngers or any other object into any openings.

1.16  Do not operate this product where oxygen is being administered.
1.17  Wear safety glasses and goggles when operating this product. Never point any air nozzle or air  
 

sprayer toward another person or any part of the body.

1.18  Use only in well ventilated areas.  
1.19  Never block pump exhaust.  Serious injury can result from pressure build up.

1.20  To Reduce Risk Of Electrical Shock...
1.21  Do not disassemble. Disassembly or attempted repairs if accomplished incorrectly can create    

 

electrical shock hazard. Refer servicing to qualifi ed service agencies only.

1.22  Unit is supplied with a three pronged plug.  When using the AC adapter, be sure to connect  

 

 

pump to a properly grounded outlet only.

1.30  To Reduce Risk Of Electrocution...
1.31  Do not use this product in or near area where it can fall or be pulled into water or other liquids.
1.32  Do not reach for this product if it has fallen into liquid. Unplug immediately.
1.33  Never operate this product outdoors in the rain or in a wet area.

1.40  To Reduce Risk Of Explosion or Fire...
1.41  Do not use this pump in or near explosive atmospheres or where aerosol (spray) products are   
 

being used.

1.42  Do not pump combustible liquids or vapors with this product or use in or near an area where    

 

fl ammable or explosive liquids or vapors may exist.

1.43  Do not use this product near fl ames.

WARNING

Failure to observe the above safety precautions could result

in severe bodily injury, including death in extreme cases.

4

Summary of Contents for WELCH GEMINI 2050













Reviews: