![background image](http://html1.mh-extra.com/html/gardner-denver/vst225/vst225_installation-operating-and-service-manual_3899650068.webp)
13-17-609 Page 67
8-3
Figure 8-3 – MOTOR REMOVAL HARDWARE
·
Remove coupling guard by removing four bolts
·
Remove two bolt/nut/washer combos securing [main motor] rear support to baseframe.
·
Insert temporary support between adaptor casting and support frame (e.g., wood beam) to
maintain compressor level when main motor is retrieved.
·
Remove four bolts securing main motor to adaptor.
·
Slide/Pull main motor away from adaptor until coupling hubs separate and allow removal of
spider.
·
Inspect coupling element for signs of wear and tear such as indentations, cracks, deformation,
extrusions, etc. Replace, if necessary.
·
Re-assemble main motor and cooling fan components in reverse order of disassembly.
302ETW810-B
(Ref. Drawing)