H4960700 Date 20.11.08 Issue 002
27
CLEAN OIL RESERVOIR
1.
Remove the return line filter assy and the oil reservoir tank lid assembly
2.
Clean the reservoir.
3.
Re-fit the oil reservoir tank lid assembly, applying ‘Hylomar’ jointing compound to
the gasket.
4.
Re-fit the return line filter c/w new cartridge.
5.
Close the drain valve.
6.
Reconnect the suction hose to the pump.
7.
Replenish the reservoir with fresh hydraulic oil.
8.
Slacken the suction hose connections at the pump, allow it to fill with oil and re-
tighten
the
connections.
PRIME SYSTEM
Start the vehicle’s engine. During the following procedure replenish the reservoir as
necessary. Engage the PTO unit and run the system for the shortest time possible while
carrying out the following operations:-
1.
Raise and lower the stabilisers.
2.
Raise the base boom & mid boom.
3.
Extend the tele–boom.
4.
Slew the boom structure.
5.
Lower the booms and stow them.
6.
Disengage the PTO unit and operate the DC hydraulic power unit a few times.
7.
Re-engage the PTO unit and run the system for 15 seconds to prime the
pressure and drain lines.
8.
Reconnect the flexible hose to the Multi-flow filter, being careful to catch
any
spillage.
9.
Wipe down the equipment to remove any spillage and secure any covers
removed.
Summary of Contents for VM 135
