H4960700 Date 20.11.08 Issue 002
4
INTRODUCTION
The VM135 is a vehicle mounted aerial work platform and is one of a comprehensive
range designed and manufactured by Gardner Denver UK.
These platforms are designed for installation on a variety of chassis-cab commercial
vehicles.
The twin boom configuration with additional tele–boom section allows excellent
manoeuvrability in confined spaces. The machine incorporates standard features
specifically designed to ensure operator confidence and ease of operation.
This manual is intended to assist the owner/operator in gaining a thorough
understanding of the safe operation of the machine, its capabilities and the routine
maintenance necessary.
Gardner Denver UK operate a policy of continuous improvement and reserve the right to
change specification and equipment without notice. Therefore, some illustrations or text
within this manual may differ from your machine.
ENQUIRIES
In case of any query concerning your machine, contact the service manager at the
address below quoting the serial number of the unit.
The serial number is marked on a plate fitted on the nearside of the column or chassis.
The Service Manager
Gardner Denver UK
P O Box 468
Cross Lane
Tong, Bradford
West Yorkshire
BD4 OSU
Tel: 01274 683131
Fax: 01274 655221
Summary of Contents for VM 135
